TD Series Thermal Imaging Cameras Quickstart Guide V1.0 202109 Thank you for purchasing this product. Please read this Guide first and keep it properly for future reference. The picture is for reference only, the product shall prevail in kind.
- CONTENTS IMPORTANT .......................................................................... 1 FCC WARNING ................................................................................1 NOTES ................................................................................. 2 LIST OF PARTS ..................................................................... 5 PRODUCT COMPONENTS ..................................................... 6 QUICKSTART INSTRUCTIONS .............................................
- IMPORTANT Thank you for purchasing this product. Please read this Guide first and keep it properly for future reference. We hope this product will meet your expectations. This Guide is a general guide for a series of products, which means that the product you receive may differ from the description in the Guide. The actual product you receive shall prevail. This Guide is prepared to introduce our products to the users.
- NOTES DANGER 1) Please follow the method described in this Guide for charging the cell, and follow the charging procedures and precautions. Improper charging may cause overheating, damage and even personal injury; Do not attempt to open or disassemble the cell at any time. If any liquid touches the eyes in case of cell leakage 2) Please rinse with clean water immediately and seek medical care. WARNING 1) Please keep the device as stable as possible to avoid violent shaking.
accessories to avoid damage. 6) Do not disassemble the unit by yourself, which may cause damage to the device and loss of warranty rights. 7) Do not use soluble or similar liquid on the device and cables, which may cause damage to the device.
environment or near high-temperature objects. 11) Do not short-circuit the positive and negative terminals of the cell. 12) Do not place the cell in a humid environment or the water. NOTES 1) Do not expose the device to dust or moisture. When used in an environment with water, avoid splashing water on the device. The lens shall be covered when the device is not in use. 2) When this device is not used, please place the device and all accessories in the special packing box.
- LIST OF PARTS - Number 1 2 3 4 5 6 Items BAG 18650 CELL MICRO USB CABLE VIDEO CABLE WRIST STRAP 18650 CHARGER Qty 1 1 1 1 1 1 BAG 18650 CELL MICRO USB CABLE VIDEO CABLE WRIST STRAP 18650 CHARGER 5
- PRODUCT COMPONENTS This Guide is applicable to several models of this series, and the illustration is only for one of them.
1. FOCUS RING After the thermal imaging camera is turned on, it shall be aimed at the target. When the distance between the observation target changes, the image may be blurred. Therefore, it is necessary to turn the lens focus ring to refocus until the target image is clear. 2. LENS COVER Please cover the lens to protect the lens when the product is not in use! 3. USB Type-C port The external port with USB cable can be connected to the external power supply to charge the product.
- QUICKSTART INSTRUCTIONS BUTTON POWER BUTTON CURRENT DEVICE STATUS SHORT PRESS LONG PRESS Power on (menu bar not shown) Compensation Display off/off Power on / Power on Display off Display on Display on upon button release Focus far (some models) BRIGHTNESS BUTTON COLOR PALETTES BUTTON ZOOM-IN BUTTON 8 Menu bar not shown Switch display brightness Menu bar display Toggle options / Menu bar not shown Switch to color palettes Enter menu Menu bar display Switch to scene mode (some mo
【BUTTON DESCRIPTION】 1. POWER BUTTON · Power on Long press and hold the power button until the startup picture appears in the eyepiece, then the device can be switched on successfully. · Power off Manual power-off: long press and hold the power button, the power-off progress bar will be displayed, and the power-off succeeds after the progress bar is finished. Automatic power-off: in the set automatic power-off time, without any button operation, the automatic power-off succeeds.
short-press the power on/off button to complete the corresponding compensation action. 2. BRIGHTNESS BUTTON · Adjust screen brightness Short press the brightness button to switch to the screen brightness. · Focus far (some models) Long press and hold it to focus far. · Switch to scene mode (some models) Long press and hold it to switch to the scene mode. 3. COLOR PALETTES BUTTON · Switch to color palettes Short press it to switch to white hot/black hot, red hot/iron red, and blue hot.
not called up, short press the button to switch to magnification and PIP. · Focus near (some models) Long press and hold it to focus near · Hot track (some models) Long press and hold it to adjust the hot track. 【FUNCTION DESCRIPTION】 1. Video output It can be turned on or off. 2. WiFi The WiFi can be used to transmit real-time video to the mobile phone after the mobile phone client is connected to the device, and the device can be operated through the APP. 3.
NOTE: The adjusted brightness value will be saved in the current scene mode. 6. Hot track A white cross cursor is displayed when it is turned on to trace the highest temperature point in the full image. 7. Scene mode Three scene modes, natural/enhanced/highlight, can be set. 8. Auto Stand-by The Auto Stand-by time can be set to 5/10/15 min. If there is no operation within the set time, the sleep state will be entered. 9. Automatic power-off The automatic power-off time can be set to 15/30/60 minutes.
- TROUBLESHOOTING 1. The device fails to start Solution: Replace the cell or connect the adapter for charging. 2. The screen goes out during use Solution: Short press any button to wake up sleep and light up the screen. 3. The image of the device is blurred during use Solution: Long press and hold the brightness button or Zoom-in button for focusing until the display is clear.
- STORAGE AND TRANSPORT The following is the correct storage and transportation of the product. To prevent danger, property loss, etc., please read the manual carefully before using the device Strictly observe it, and keep the instruction properly after reading it. Storage: 1. The packaged product shall be stored in a wellventilated, clean, condensate-free and corrosive gasfree room with temperature of -30 ℃ ~ 60 ℃ and relative humidity not exceeding 95%. 2.
Special statement: the version of the Guide will be updated after the technical improvement of the product. Guide Sensmart http://www.guideir.cn Adress: No.6 Huanglongshan South Rd, Wuhan, 430205, P.R.
