User's Manual
Table Of Contents
- - CONTENT -
- -IMPORTANT-
- - FCC WARNING -
- -RF exposure warning-
- -IMPORTANT-
- - LIST OF PARTS -
- - PRODUCT COMPONENTS -
- - QUICKSTART INSTRUCTIONS -
- 【BUTTON DESCRIPTION】 BUTTON DESCRIPTION
- POWER OFF:
- DISPLAY OFF:
- DISPLAY ON:
- COMPENSATION:
- 2. PHOTOGRAPHING CONSTRUCTION TAKE PHOTOS
- VIDEO RECORDING
- 3. RANGING BUTTON
- 4. UPPER BUTTON SWITCH SCENE MODE
- ZOOM IN
- 5. LOWER BUTTON
- ZOOM OUT
- 6. MENU BUTTON SHORTCUT MENU
- MAIN MENU
- CONFIRM AND BACK/EXIT
- 【FUNCTION DESCRIPTION】
- 2. MAIN MENU
- NOTE: The adjusted brightness value will be saved in the current scene mode.
- NOTE: The adjusted contrast value will be saved in the current scene mode.
- NOTE: Search and download 'TargetIR' APP in the mobile phone APP store, open the APP, find the WiFi name 'Binocular-TI-xxxx' in the settings of mobile phone WiFi, and enter the password '12345678 ', remote operation after successful connection.
- NOTE: It shall be used together with optional accessories.
- NOTE: When the power is low, please replace the cell in time!
- 2. The device cannot take photos/record.
- 3. The device display time does not match the actual time display.
- 4. Screen goes out during use.
- 5. The image of the device is blurred during use.
- - STORAGE AND TRANSPORT -
GB CN DE FR RU
16
Russian/German/French.
·
Memory card formatting: you can select formatting
memory card, select 'yes', memory card formatting,
select 'no', cancel the operation.
·
Restore default: You can choose whether to
restore the default values. Select 'Yes' to restore all
parameters to factory settings; Select 'No' to cancel
the operation.
·
Remote control: When it is turned on, it will search
for a Bluetooth remote control. After the connection
is successful, it can use the Bluetooth remote control
to control all functions of the button on the device
(except the power-off function).
NOTE: It shall be used together with optional
accessories.
·
Laser indication: the display of red/yellow/green
laser indication icon can be toggled.
·
Indication calibration: The coordinates of the three
laser Indicator icons can be set separately.
·
About: Check the current device in the
APP,ARM,MCU,FPGA version number and MAC
address.
·
Power display: When the thermal imaging camera
is turned on and the cell power level changes, the