User's Manual
Table Of Contents
- - CONTENT -
- -IMPORTANT-
- - FCC WARNING -
- -RF exposure warning-
- -IMPORTANT-
- - LIST OF PARTS -
- - PRODUCT COMPONENTS -
- - QUICKSTART INSTRUCTIONS -
- 【BUTTON DESCRIPTION】 BUTTON DESCRIPTION
- POWER OFF:
- DISPLAY OFF:
- DISPLAY ON:
- COMPENSATION:
- 2. PHOTOGRAPHING CONSTRUCTION TAKE PHOTOS
- VIDEO RECORDING
- 3. RANGING BUTTON
- 4. UPPER BUTTON SWITCH SCENE MODE
- ZOOM IN
- 5. LOWER BUTTON
- ZOOM OUT
- 6. MENU BUTTON SHORTCUT MENU
- MAIN MENU
- CONFIRM AND BACK/EXIT
- 【FUNCTION DESCRIPTION】
- 2. MAIN MENU
- NOTE: The adjusted brightness value will be saved in the current scene mode.
- NOTE: The adjusted contrast value will be saved in the current scene mode.
- NOTE: Search and download 'TargetIR' APP in the mobile phone APP store, open the APP, find the WiFi name 'Binocular-TI-xxxx' in the settings of mobile phone WiFi, and enter the password '12345678 ', remote operation after successful connection.
- NOTE: It shall be used together with optional accessories.
- NOTE: When the power is low, please replace the cell in time!
- 2. The device cannot take photos/record.
- 3. The device display time does not match the actual time display.
- 4. Screen goes out during use.
- 5. The image of the device is blurred during use.
- - STORAGE AND TRANSPORT -
GB CN DE FR RU
8
1.
FOCUS RING
After the thermal imaging camera is turned on, it shall
be aimed at the target. When the distance between the
observation target changes, the image may be blurred.
Therefore, it is necessary to turn the lens focus ring to
refocus until the target image is clear.
2.
LENS COVER
Please cover the lens to protect the lens when the
product is not in use!
3.
USB TYPE-C PORT
The external port can be connected with the external
power supply to supply power to the product.
The output of the external power supply is 5V2A.
4.
MICRO HDMI
Through the video cable of the external port, the external
power supply and the external screen can be connected
at the same time, and the image of the thermal imaging
camera can be output to the external monitor for display.