Quick Start Guide
Restore default : Restore the factory state.
Ranging: The rangender data can be controlled to be turned
on/o, and the
appearing when 'Ranging' is turned on is
the actual measurement point and the measurement data is
displayed.
Ranging coordinates correction:This feature is available
for devices equipped with rangenders. When the ranging
information is signicantly dierent from the actual distance,
the ranging coordinates function is used to correct the ranging
position.
Note: When the 'ranging' function is turned on, it can't be
amplied or reduced to ensure the ranging accuracy.
Cursor : The laser cursor can be turned on/o, and the
appearing when the ' Ranging ' is on is the actual laser pointing
point.
Cursor coordinates:This feature is only available for devices
equipped with laser indicators. When laser indicator indicates
that the error is large, the cursor coordinates function is used to
correct the laser indication position.
When using the thermal imager for the rst time, make sure to charge
the thermal imager for at least 4 hours with a matching USB charger.