User Guide
Table Of Contents
- QUICK START GUIDE
- 快速操作指南
- FCC WARNING
- This equipment may generate or use radio frequency
- This device complies with part 15 of the FCC Rules
- The device has been evaluated to meet general RF e
- NOTE: This equipment has been tested and found to
- are designed to provide reasonable protection agai
- However, there is no guarantee that interference w
- •Reorient or relocate the receiving antenna.
- •Increase the separation between the equipment and
- •Connect the equipment into an outlet on a circuit
- •Consult the dealer or an experienced radio/TV tech
- •The rating information is located at the bottom of
- PRECAUTIONS
- CHAPTER 1 LIST OF ITEMS
- CHAPTER 2 APPEARANCE
- CHAPTER 3 BASIC OPERATIONS
- CHAPTER 4 OTHERS
- CHAPTER 5 ANALYSIS OF COMMON PROBLEMS
EN CN
9
3.6
Settings
Click to open the hidden status bar and then click to enter the settings
menu.
3.7
F1/F2 accessibility buttons
1.
Enter the settings menu and select F1/F2 to set the commonly used
functions.
2.
If F1/F2 is set as laser ranging, turn on the “Laser ranging” in the settings
menu and back to the real-time preview interface and click F1/F2, the
device will emit a red laser dot and display the distance measured in the
center of the screen.
3.
If F1/F2 is set as intelligent calibration, turn on the “Save and calibrate
intelligently (O)” in the settings menu and back to the real-time preview
interface and press the shooting button to freeze the photo, then click
for intelligent calibration and click for manual calibration.