Users Manual Part 1


Isotherm Cancellation
1. Click the shortcut menu [ ] and slide the object interface down to
the isotherm bar.
2. In the isotherm bar, touch [
] to turn o the isotherm display, as
shown in the figure.
Custom Emissivity
1. Click to enter emissivity, and select [Custom] . At present, various preset
values are provided as shown in the figure.
2. Customize the parameters according to your own requirements, and
control the range in 0.01–1.00. Slide the corresponding values to
modify them. Click the [<] button in the upper left corner to exit and
save, as shown in the figure.