Users Manual Part 1



1 Emissivity. Set the emissivity value based on the measured target.

2 Temperature measurement range. Click to enter the interface of

temperature measurement range setting

3 Temperature measurement parameters. Click to enter the interface

of temperature measurement parameter setting (relative humidity,

distance and atmospheric transmissivity, etc.).

4 Setting. Click to enter the setting interface. You can also enter the

setting interface by pressing the physical button [MENU].

5 LEVEL SPAN mode. The default is automatic mode. You can switch

among automatic, semi-automatic and manual modes through the

physical button or touch screen.

6 Popup-menu icon. Entering the popup shortcut interface, you can

set up the shortcut menu.

7 Time and date. Enter setting - general - date and time for setting.

Real-time Image Interface

ΑΒ