User Guide

Menu button:
After the connection with a thermal imager, all
functions of the “Menu button” from the thermal
imager can be operated.
Down button:
After the connection with a thermal imager, all
functions of the “Down button from the thermal
imager can be operated.
Up Button
Down Button
Power button:
Indicator
Indicator:
Red: It keeps a constant red indicating for a certain
while and goes off if the Bluetooth remote controller is
on but not connected with a thermal imager.
Green: It keeps a constant green indicating for a
certain while and goes off if the Bluetooth remote
controller is on and connected with a thermal imager.
Red flicker: It flickers for a certain while and goes
out if the battery capacity of the Bluetooth remote
controller is low.
Long press the power button to start up the Bluetooth
remote controller.
Remark: If the bluetooth remote controller is not
connected to the thermal imager within 3 minutes, it
will automatically shut down.
Up button:
After the connection with a thermal imager, all
functions of the “Up button from the thermal imager
can be operated.
Installation Methods:
The Bluetooth remote controller is fixed by magic
tape, the matte surface is attached to the fixed point
while the hook surface is stuck to the back of the
remote controller, and both the matte and the hook
surfaces are affixed and fixed together.
Wuhan Guide Sensmart Tech Co., Ltd.
http://www.guideir.com