User's Manual

Changing the Network Configuration
Three communication links can be configured from the Service Interface:
•
Service Interface to Manager
•
Manager to Sensor (Antenna Unit)
•
Manager to Validator (when available)
To Make Changes to the Network Configuration
1. Click on the Network Config tab of the Service Interface.
2. Click the Disconnect button for the type of communication that you wish to modify.
3. Click the Edit button.
4. Alter the settings as required.
5. Click Apply to save the changes or Cancel to discard.
If the Manager is running on the same PC as the Service Interface, enter 127.0.0.1 as the IP address.
34