User's Manual

Adding and Selecting a Remote Station
The Service Interface is used to maintain a list of Remote Stations which the local station may
encounter. One of the Remote Stations is then selected to be “active”, which makes it the only
station which the local station can lock onto.
To Add a Remote Station
1. Click on the Remote Stations tab of the Service Interface.
2. Click the Take Command button if not already done.
3. Click on Add New Station.
4. Enter a name for the Remote Station in the Description field.
5. Select a Frequency Pair, Address Code, the model of the Remote Station and whether it is
Floating or Fixed.
6. Click the Add button.
The name of the new station is now included in the list of known Remote Stations.
To Select a Remote Station
1. Click on one of the entries in the Known Stations list.
2. Click the Select Remote Station button.
The name of the selected station now has a grey background.
To Edit a Remote Station
1. Click on one of the entries in the Known Stations list.
2. Click Edit Station.
3. Change parameters as required.
4. Click Apply to save the changes or Cancel to discard.
To Delete a Remote Station
1. Click on one of the entries in the Known Stations list.
2. Click Delete Station.
3. On the confirmation dialog, select OK.
33