User's Manual

Installing Artemis Control Software onto a Type 3 Marine Processor
This section explains how to install the Artemis control software onto a Type 3 Marine Processor. If this Marine Processor has been supplied by Guidance Marine, it will have been shipped with the
control software already installed. However, it may be necessary to upgrade the software with a newer version. If so, first uninstall the existing software.
To Uninstall the Artemis Control Software
1. Click on Start > All Programs > Accessories > System Tools > Control Panel.
The Control Panel screen is displayed.
2. Click on Programs and Features.
3. In the list of installed programs, right click on Artemis Dashboard
(on a touchscreen monitor, touch and hold).
4. Click on the Uninstall option in the context menu.
5. Click on the Uninstall button on the Artemis Dashboard Setup window.
6. When prompted, click on the Restart button.
After the restart, the Artemis Dashboard Setup window reappears.
7. When prompted, click on the Restart button.
The uninstallation process for the Dashboard is complete following the restart.
8. Repeat steps 3..7 for the Artemis Manager and the Artemis Service Interface.
To Install the Artemis Control Software
1. Locate the files ArtemisDashboardSetup.exe, ArtemisManagerSetup.exe and
ArtemisServiceInterfaceSetup.exe on the USB memory stick on which they were supplied.
2. Double-click on the ArtemisDashboardSetup.exe file.
The Welcome screen is displayed.
3. Click on the Install button.
4. When prompted, click on the Restart button.
The Welcome screen is displayed.
5. If required, change any of the settings from the default values shown.
6. Click on the OK button
7. When prompted, click on the Restart button.
The installation process for the Dashboard is complete following the restart.
8. Repeat steps 2..7 for ArtemisManagerSetup.exe and ArtemisServiceInterfaceSetup.exe.
28