User's Manual

l
30
The following two functions of the local Artemis station can be controlled from the
Dashboard:
Sensor Settings
Power Mode
Normal power mode is suitable when the range between the local and remote stations
is 200m or more.
Reduced power mode is suitable for ranges less than 200m.
Automatic causes the power mode to be automatically switched between Normal and
Reduced depending on the current range between the stations.
Anti-Icing
When this is set to Auto and the temperature falls towards freezing point, the heating
inside the Artemis antenna will automatically be switched on.
To Change the Sensor Settings:
1. Click on the Advanced button on the side bar.
2. Click on the Sensor Settings button on the menu pane.
3. Amend the Power Mode and/or Anti-Icing settings.
4. Click on the Apply button.