User's Manual

l
29
The Comms Settings menu pane displays the configuration of communications between
the Dashboard and Manager and between the Manager and Sensor (local station).
Network Communications Settings
To Change the IP Address of the Artemis Manager:
1. Ensure that the Dashboard is not in communication with the manager. If necessary, click
on the following buttons:
i) Guidance
ii) Relinquish Command
iii) Disconnect
2. Navigate to Advanced > Comms Settings.
3. Click on the Edit button within the Artemis Manager panel.
4. Amend the IP Address.
5. Click on the Apply button to confirm.
To Change the Comms Settings for the Artemis Sensor:
Use the Service Interface (see the Artemis Mk6 Installer’s Guide); the Artemis Sensor panel
on the Comms Settings pane of the Dashboard is for information only.