Operation Manual

D
14
GB
ENGLISH
Technical Data
Angle Grinder WS 230-2350 R
Art. No 58109
Service connection 230 V ~ 50 Hz
Rated input 2350 W
No-load speed 6500 min
-1
Grinding disk diameter max. 230 mm
Grinding disk thickness max. 6,3 mm
Cutting disk thickness min. / max. 2,7 / 3,3 mm
Grinding surface diameter max. 230 mm
hole diameter 22,23 mm
Thread of work spindle M14
Weight 4,4 kg
Noise details
Sound pressure level L
pA
93,5 dB (A)
Sound power level L
WA
104,5 dB (A)
Measured according to EN 60745;
Uncertainty K = 3 dB (A)
Wear ear protectors!
Vibration details
Vibration total values
(triaxial vector sum)
determined according to EN 60745:
Surface grinding:
Vibration emission value a
h, SG
6,560 m/s²
Disk sanding:
Vibration emission value a
h, DS
6,560 m/s²
Uncertainty K = 1,5 m/s
2
For other applications, e.g. Abrasive Cutting-O
Operations or Wire Brushing other vibration values
could occur.
WARNING: The vibration emission level will vary
because of the ways in which a power tool can be
used and may increase above the level given in this
information sheet.
The vibration emission level may be used to compare
one tool with another.
It may be used for a preliminary assessment of
exposure.
An accurate estimate of the vibratory load
shouldalso take into account the times when the
tool isshut down or when it is running but not
actually inuse. This may signicantly reduce the
vibratoryload over the total working period.
Identify additional safety measures to protect
theoperator from the eects of vibration such
as:maintain the tool and the accessories, keep
thehands warm, organisation of work patterns.
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
Persons over 18 years of age can only workon the
appliance.An exception includes youngsters trained
in order to reachknowledge under supervision
of the trainer duringoccupational education.
In case of any doubts about connection and operati
-
on refer please to our customer center
Specied Conditions Of Use
The angle grinder is used for grinding and cutting
metal, stone and ceramic materials, as well as for
sanding.
Use the cutting guard from the accessories range for
cutting application.
Please refer to the instructions supplied by the acces
-
sory manufacturer.
The machine is suitable only for working without
water.
Do not use this product in any other way as stated for
normal use. Not observing general regulations in force
and instructions from this manual does not make the
manufacturer liable for damages.
Emergency procedure
Conduct a rst-aid procedure adequate to the injury
and summon qualied medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. If you seek help,state the
following pieces ofinformation: 1. Accident site, 2.
Accident type, 3. Number of injured persons, 4. Injury
type(s)
Symbols
WARNING / Caution!
Read the operating instructions to reduce
the risk of injury.
Wear eye protective goggles !
Wear ear protectors!
Wear gloves!
Unplug the machine before any work
on it.