Operation Manual

Introduction
To enjoy your new sand nozzle as long as possible, we
ask you to read carefully the Operating Instructions and
the attached safety instructions before putting the product
into operation. Further, we recommend keeping the
Operating Instructions for future reference to recall the
product features.
As part of continuous product improvement, we
reserve making technical changes to improve our
product.
This document is the original Operating Instructions.
Technische Daten
Working hose: 20 m
Connection hose: 1,9 m
Hose diameter: ½“
Swing radius: 180°
Operating pressure: 8 bar
Temperature range: -5 till 45°C
Connection thread: ¾“ IG / ½“ IG
Built up size: 650 x 250 x 410 mm
Weight: 9,1 kg
Kennzeichnungen
Produktsicherheit:
Product corresponds to
appropriate EU standards
Warnung:
Warning/Caution
Gebote:
Do not touch these parts to
prevent any burns. Learn to
use the appliance before using
it.
Umweltschutz:
Dispose waste professionally
so as not to harm the
environment.
Packing cardboard material
may be delivered to
collecting centres for
recycling.
Verpackung:
- Protect against moisture
- Fragile
- This side up
Interseroh-Recycling
Technische Daten:
working hose connection hose
Hose diameter Swing radius
Operating pressure Temperature range
Connection thread Weight
Shut off the water supply and
clean the hose, before you roll
up!
Warranty
A warranty period of 12 months applies to commercial use
and 24 months apply to private use and commences on
the day of purchase of the device.
Warranty applies exclusively to failures due to defective
material or workmanship. An original sale slip with
indication of date of sale must be presented in case of
claiming for the warranty rights.
Warranty does not cover unprofessional use such as
device overload, violent use, damage caused by third party
or foreign materials, failure to comply with operations and
assembly manual, and normal wear and tear.
Emergency Action
Apply the first aid adequate to the injury and get qualified
medical assistance as quickly as possible. Protect the
injured person from more accidents and calm him/her
down.
For the sake of eventual accident, in accordance with
DIN 13164, a workplace has to be fitted with a first-aid
kit. It is essential to replace any used material in the
first-aid kit immediately after it has been used. If you
seek help, state the following pieces of information:
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
5