Operation Manual

Replace the metal brush

1. Unscrew the nuts on the metal brush.

2. Replace the metal brush and xate it.

Metal brush and saw belt distance

1. Loosen the two Allen screws (A)

2. Move the metal brush until the saw blade slightly

touches it and xate it.

Fine adjustment:

1. Loosen the nuts on the metal brush. (B)

2. Move the metal brush and xate it.

Stop position

Unscrew or screw the stop using an Allen wrench. The

saw blade must not touch the table.

Setting and adjustment

Adjust the 0 / 45° stop

Adjust the stop screw by a fork wrench so that 0/45° is

accurately displayed.

Auto-Stop switches

Loosen the four Phillips head screws, move them until

the switch touches the saw and xate them. Perform

a test run. The saw must automatically turn o when

it touches the stop.

Adjust the belt guide rollers

1. Loosen the guide roller screws.

2. Adjust the guide rollers in a way the saw blade

slightly touches them and xate them.

3. Adjust the distance to the workpiece

ENGLISH