Operation Manual
16
JG 1000 E
GB
Warning against dangerous electric
voltage
Warning against automatic starting
Accessory - Not included in standard
equipment, available as an accessory.
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
Protect against humidity
This side up
ENGLISH
Inspection and maintenance plan
Time interval Description Any other details
As needed Clean the foot valve. Check the foot valve function
Failures – causes - removal
Failures Causes Removal
Engine does not start No nework voltage.
Pump wheeel is blocked.
Check the voltage.
Turn the engine shaft with screwdriver
through the fan cover (to release friction
circles sealing that may be stuck together)
Pump does not suck Missing, untight or blocked foot valve
Foot valve is not in water.
No water in the pump shell.
Too high suction height.
Air bubbles in suction pipeline.
Connections not sealed, the pump sucks the
air, the pump is not bleeded.
Assembly or clean the foot valve.
Immerse the foot valve into water.
Fill the pump shell with water.
Check the suction height.
Check the tighting of suction pipeline.
Carefully repeat connection according to
chapter „
SUPPLY
“!
Thermal detector swit-
ching the pump o
4
Pump if overheated and switched o by the
thermal overloading protection.
Electric power missing.
Impurity particles (e.g. pebbles) have settled
down in the suction hole.
Let the device getting cool!
Check power supply
Disassamble and clean the susction hose,
prevent suction of foreign substances.
Insu cient amount of
water pumped
Too high suction height.
Foot valve suction basked dirty
Water level drops quickly.
Check the suction height.
Clean tne suction basket.
Locate the foot valve lower.
Clean the pump and replace worn parts.
Symbols
Read the Operating Instructions
Before carrying out any work on the machi-
ne, disconnect the plug from the socket.
Cable pullying / transport prohibited
Staying in the transportation medium
prohibited
Protect the machine against snow, ice
and frost.
Protect the machine against moisture
and wet.