Operation Manual

GB
9
2.5 Operator Requirement
The operator shall read the instruction manual carefully before using the unit.
2.5.1 Qualification
No special qualification is required for use of the unit except for detailed direction by a professional.
2.5.2 Minimum Age
Only persons above 16 years of age are allowed to work with the unit. .
Exempted from the provision is the use of the juvenile trainees if they work in the course of their
professional training with an aim to obtain the skill under a trainer supervision.
2.5.3 Training
Use of the unit requires adequate lesson by a professional or the use of the manual only. Special training is
not required.
3 Technical Data
GUKS 2100
Supply connection
230 V
Frequency/Protection type
50 Hz/IP 23
Protection class
II
Max. output P
1
1700 W/S6; 40 %
Motor speed
4300 min
-1
Saw blade
210 mm/30 mm/2,5 mm/24 HM
Length of draw
210 mm
Cutting output at 90°
63 mm
Cutting output at 45°
40 mm
Table size
661 x 608 mm
Table height rest
included/excluded
900 mm/340 mm
Exhaust connection
100 mm
Mitre cut
-1,5°/46,5°
Connection cable
2 m/H05 VV-F
Acoustic output level
measured
Guaranteed
95 dB (A)
98 dB (A)
Dimensions lxwxh (mm)
620 x 660 x 900
Weight ca
38 kg
Ordering No.
55000
4 Transportation and Storage
• The unit should be cleaned throughly for a longer storage. .
• Always push the blade in before putting the unit on storage to avoid accidents.
• Protect the saw with a plastic cover, carboard etc.from weather effects.