Operation Manual

GB
8
2.4.2 Electrical Residual Hazards
Hazard
Description
Protective Action
Residual Hazards
Direct electrical contact
Defective cable or plug may
cause an electrical shock.
Accidents caused by
conductive parts on open or
defective structural parts.
Have the defective cable/plug
exchanged by a professional.
Use the unit only if connected
via a faulty current sw itch (FI).
Alw ays unplug for maintenance
Use the unit only if connected
via a faulty current sw itch (FI).
Indirect electrical contact t
2.4.3 Noise Hazard
Hazard
Description
Protective Action
Residual Hazards
Hearing Impairment
Prolonged w ork w ith the unit
may result in hearing
impairment.
Wear ear protectors
2.4.4 Materials and Other Substances Hazards
Hazard
Description
Protective Action
Residual Hazards
Contact, aspiration
Lungs may be affected by great
amount of dust being formed.
Health-hazardous saw dust
emissions form operations
w ithout extracting the dust.
Alw ays wear breathing mask
w hen w orking w ith the unit.
Install and use an exhaust
equipment.
2.4.5 Human Factor Neglect
Hazard
Description
Protective Action
Residual Hazards
Neglect us of personal
protection equipment
Operating the unit w ithout
adequate PPE may cause
severe external/internal injuries
Alw ays wear prescribed
protective clothing and w ork
considerately.
Inadequate local lighting
Insufficient light is a heavy
safety risk.
Provide for sufficient lighting
2.4.6 Other hazards
Hazard
Description
Protective Action
Residual Hazards
Throw n aw ay objects and
splashes
In the process of cutting, the
blade or mechanical particles
may injure your eyes.
Alw ays wear goggles w hen
w orking w ith the unit
2.4.7 Disposal
Disposal instructions are given by pictographs on the unit or packaging. For meaning of individual symbols
refer to chapter “Symbols on Unit”.