Operation Manual

22
Technical Data
Mobile thicknesser GMH 2000
Art. No ................................................................................55008
Service connection .................................230 V ~ 50 Hz
Max. Power ...................................................2000 W P1
Max., feed speed .........................................6,4 m/min
Idle speed ......................................................8000 min
-1
Max. plane thickness .....................................305 mm
Plane thickness ........................................... 4-160 mm
Chip removal .....................................................0-3 mm
Size Surfacer bench ........................... 700 x 305 mm
Extractor port diameter ..................................55 mm
Power supply cable ........................1,8 m / H05 VV-F
Blade shaft diameter ........................................47 mm
Blade shaft speed ...........................................19,6 m/s
Blade Number ................................................................2
Blade Type ..................................................................HSS
Blade Dimensions ..........................310 x 20 x 2 mm
Weight ......................................................................32 kg
Protection class ............................................................. II
Degree of protection ...........................................IP 20
Noise details
Sound pressure level L
pA
1
....................... 91,6 dB (A)
Measured sound power level L
WA
1
...................... 101,6 dB (A)
Guaranteed sound power level L
WA
2
..................105 dB (A)
Uncertainty K = ............................................................3 dB (A)
Wear ear protectors!
Measured according to
1
EN 61029-1,
2
2000/14/EC
WARNING Conduct a rst-aid procedure adequa-
te to the injury and summon qualied medical
a
ttendance as quickly as possible. Protect the injured
person from further harm and calm them down. For
the sake of eventual accident, inaccordance with
DIN13164, a workplace has to be ttedwith a rst-
aid kit. It isessential to replace any usedmaterial in
the rst-aid kitimmediately after it has been used.
The vibration emission level may be used to compare
one tool with another.
It may be used for a preliminary assessment of
exposure.
An accurate estimate of the vibratory load
shouldalso take into account the times when the
tool isshut down or when it is running but not
actually inuse. This may signicantly reduce the
vibratoryload over the total working period.
Read and understand the
operating instructions before using
the appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
In case of any doubts about connection and operati
-
on refer please to our customer center
Specied Conditions Of Use
The surfacer and thicknesser is only designed for DIY
and hobby use.
The machine is only designed for planing wooden
materials. The wooden materials must be free of
foreign substances (nails, other metal parts, cables,
ropes, cords and the like).
WARNING!
The following work must not be carried out:
• Insert work (in other words any work which does
not extend over the full length of the workpiece)
• Recesses, tenons or cut-outs
• Planing highly warped timber in which there is
inadequate contact with the feed bench.
The protective equipment on the appliance is
strictly prohibited to be disassembled, changed,
used in conict with the designation and it is
prohibited to attach any protective equipment of
other manufacturers.
The bridge guard must not be removed during
machining. The unused part of the blade shaft must
be covered.
Not observing general regulations in force and
instructions from this manual does not make the
manufacturer liable for damages.
The current accident prevention rules and regulations
must be obeyed.
Requirements for operating sta
The appliance may only be operated and maintained
by persons familiarised with it and informed about
possible risks.
Never let children work with the appliance. Never let
adults work with the appliance unless they have been
properly trained.
The operating sta must carefully read the Opera
-
tingInstructions before using the appliance.
Q
ualication:: Apart from the detailed instructions
by aprofessional, no special qualication is necessary
forappliance using.
GB
ENGLISH