Operation Manual

27
ENGLISH
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
In case of any doubts about connection and operati-
on refer please to our customer center
Use the appliance only outside, never use it in
conned and bad ventilated areas.
Specied Conditions Of Use
Lawn trimmer for treating and cutting natural grass
plots and low bushes.
The garden appliance has only been designed to cut
grass and weed in gardens and along seed beds and
borders in private house gardens and hobby gardens.
GB
Technical Data
Lawn Trimmer GFS 700-4S
Art. No
95190
Contents 31 cm
3
Motor output 0,7 kW / 0,95 PS
min
Engine speed 6500 min
-1
Max. Cutting speed
Knife 7125 min
-1
Thread 6000 min
-1
Ø-Cutting width
Knife 255 mm
Thread 420 mm
tank capacity 0,9 l
Fuel Unleaded petrol
Weight (without fuel, cutting tool and guard,) 9,6 kg
No ise details
Sound pressure level L
pA
1)
93,7 dB (A)
Measured sound power level L
WA
1)
108,4 dB (A)
Guaranteed sound power level L
WA
2)
114 dB (A)
Measured according to
1)
EN ISO 11806;
2)
2000/14/ EG; Uncertainty K = 3 dB (A)
Wear ear protectors!
Vibration details
Total vibration values (triaxial vector sum) Determined properly EN ISO 11806
Vibration emission value a
h
7,5 m/s
2
Uncertainty K = 1,5 m/s
2
WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and
may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load shouldalso take into account the times when the tool isshut down
or when it is running but not actually inuse. This may signicantly reduce the vibratoryload over the total
working period.
Identify additional safety measures to protect theoperator from the eects of vibration such as:maintain the
tool and the accessories, keep thehands warm, organisation of work patterns.