Operation Manual

Technical specification:
Engine power Cutting width
Capacity Revolutions per minute
Weight Noise
Cutting height
Appliance
GBM 800 BS bar mower
The powerful 2.7 PS 4-stroke B&S 450 SERIES engine
makes it a special appliance designated for meadows, sides
and pastures. Due to its big wheels with a traction profile, the
appliance can comfortably be taken to steeper slopes. Travel
is significantly made easier by the forward movement while
exerting less strength.
Area of use:
Suitable for medium-size to large areas.
Scope of supply (pic. 2, 3)
1. Appliance body
2. Cutter bar
3. Key included in the supply (13/17mm)
4. Springs for cutter bar fixing to the appliance body
5. Knife cover
X. Operating Instructions and certificate of warranty
Appliance description (pic. 1)
A Guide rod handle
B Hand gas lever
C Wheel drive cable controller
D Knife drive cable controller
E Knife drive lever
F Knife drive safety lever
G Wheel drive lever
H Guide rod
I Starting cable handle
L Starter
M Engine oil filling plug
N Noise suppressor
O Engine
P Wheels
Q Belt guard
R Wing grip for rod lock
S Egg-shaped handle for guard lock
T Guard locking nut
U Seating shoes for cutting height adjustment
V Cutter bar (with knives)
Z Springs for knife clearance adjustment
EU DECLARATION OF CONFORMITY
We,
Güde GmbH & Co. KG
Birkichstraße 6
74549 Wolpertshausen
Germany,
herewith declare that the following appliance complies with
the appropriate basic safety and healthy requirements of the
EU Directives based on its design and type, as brought into
circulation by us.
In case of alternation of the machine, not agreed
upon by us, this declaration will lose its validity.
Machine description: GBM 800 bar mower
Order No. 95175
Date/authorized signature: 18 Jan, 2010
Title of signatory: Mr Arnold, Managing Director
Technical documentation: J. Bürkle FBL; QS
Applicable EU Directives:
98/37/EG - 2006/42/EG (valid from 29 Dec, 2009)
2004/108/EG
Applicable harmonised standards:
EN 12733
Guarantee
The guarantee applies exclusively to material defects or
manufacturing defects. Original purchase voucher with the
purchase date must be provided for lodging a claim in the
guarantee period. The guarantee does not cover any
unauthorised use such as appliance overload, violent use,
damage by a foreign person or item. Failure to follow the
Operating Instructions or assembly instructions and ordinary
wear and tear are also excluded from the guarantee.
Important basic safety instructions
Before you start working with the appliance please read
carefully the safety regulations and Operating Instructions
below. If you give the appliance to any other person, please
provide him or her with the Operating Instructions. Keep the
Operating Instructions for future reference!
Package: Your appliance is in a package to prevent any
damage during transport. Packages are raw materials and
therefore can be reused or recycled.
Please read carefully the Operating Instructions and follow
all instructions specified there. Use the Operating
Instructions to get acquainted with the appliance, correct
use and safety instructions. Keep the instructions for future
reference.
•
Check the oil level before using the
appliance. Refill oil if necessary.
• Carry out visual inspection of the appliance before
using it. Do not use the appliance if any guard
equipment is damaged or worn-out. Never
remove the guard equipment.
• Use the appliance solely for the purpose of use
specified in these Operating Instructions.
• Safety in the place of work is your responsibility.
• Work under sufficient visibility only.
• Never leave the appliance unattended.
• If you interrupt your work, please put the
appliance to a safe place.
• Never use the appliance when raining or in a wet
or moist environment.
14