Datasheet

mail@gude.info
www.gude.info
Gude Analog- und Digitalsysteme GmbH
Eintrachtstr. 113
50668 Koeln, Germany
T +49.221.912 90 97
F +49.221.912 90 98
Switched Power Distribution Units
03/2017
Order code Product Feature Operating Voltage Max. Current
8316-1 Expert Power Control 8316-1 8 Power Ports Schuko, energy metering per load
outlet
230 V 16 A
8316-2 Expert Power Control 8316-2 8 Power Ports IEC C13, energy metering per load
outlet
230 V 16 A
7101 Temperature Sensor 7101 -20°C to +80°C
7102 Temp./Humidity Sensor 7102 -20°C to +80°C / 0-90% humidity
7103 Air pressure/Temp./Humidity
Sensor 7103
300-1100 hPa / -20°C to +80°C / 0-90% humidity,
cable ca. 2,3 m
7201 Temperature Sensor 7201 -20°C to +80°C
7202 Temp./Humidity Sensor 7202 -20°C to +80°C / 0-90% humidity
7203 Air pressure/Temp./Humidity
Sensor 7203
300-1100 hPa / -20°C to +80°C / 0-90% humidity
Features
• 8 Power Ports individually switchable directly on the device,
via HTTP, command line tool and RS232 serial interface
• Status and Power-up delay (0...9999 seconds) adjustable
individually for each Power Port after power blackout
• Start-up peaks through simultaneous port switching prevented
by latency time of 1 second
• Programmable turn-on/turn-of sequence
• 2 energy meters per power outlet, one meter continuously, the
other resettable
• Metering of energy, current, power factor, phase angle,
frequency, voltage and active / apparent / reactive power
• Clearly visible LED display for total current, IP address, sensor
data and error reports
• 8-channel watchdog, an individual watchdog (ICMP/TCP)
can be assigned for each Power Port
• 2 interfaces for optional sensors for environmental monitoring
(temperature, humidity and air pressure)
• Event-based port switching possible by set sensor thresholds
• Comfortable configuration by web browser, Windows or Linux
tool
• Firmware update via Ethernet during operation
• IPv6-ready
• HTTP/HTTPS, e-mail (SSL, STARTTLS), DHCP, Syslog
• SNMPv1, v2c, v3 (Get/Traps)
• TLS 1.0, 1.1, 1.2
• Radius and Modbus TCP protocol supported
• Configuration and control over Telnet
• Access control via IP Access Control List
• Low power consumption
• Developed and manufactured in Germany
Electrical Connections
• 1 power supply (IEC C20,
max. 16 A)
• 8 Power Ports (Schuko, max.
16 A or IEC C13, max. 10 A)
• Ethernet connector RJ45
(10/100 Mbit/s)
• Serial interface RS232
(Sub-D 9-pin)
• 2 sensor interfaces (RJ45) for
optional sensors
Technical Details
• Case allows vertical mounting in 19 inch racks (0 RU),
LxHxD: 69 x 6 x 7 cm (length including pivotable brackets)
• Weight: ca. 2.8 kg
• Operating temperature: 0-50 °C
• Storage temperature: -20 - 70 °C
• Relative humidity: 0 - 95 % (non-condensing environment)
Expert Power Control 8316 Series
8-fold switched PDU with integrated current metering per load outlet
2
8
or
8
IPv6, SSL,
SNMPv3 & Telnet
Highlights at a glance
8 Power Ports
Outlet-metered
Event-based switching
Energy metering
2 connector types available
Vertical mounting

Summary of content (1 pages)