Datasheet

Switched & Metered Power Distribution Units
04/2019
[e-mail]
www.gude.info
shop.gude.info
GUDE Systems GmbH
Von-der-Wettern-Str. 23
51149 Koeln
•
Germany
T +49.221.912 90 97
F +49.221.912 90 98
Expert Power Control 8221-1 / 8226-1
12-fold switched PDU with integrated current metering and monitoring
Front and rear side of Expert Power Control 8221-1
and Expert Power Control 8226-1
Dual-Circuit
Outlet-metered (8226)
Order Code Product Feature Operating Voltage Max. Current
8221-1 Expert Power Control 8221-1 2 x 6 outlets IEC C13, energy metering per bank 230 V 2 x 16 A
8226-1 Expert Power Control 8226-1 2 x 6 outlets IEC C13, energy metering per bank
and per outlet
230 V 2 x 16 A
IPv6
HTTPS
SSL
SNMPv3
Telnet
Modbus TCP
Expert Power Control 8221-1 and Expert Power Control 8226-1
12-fold switched PDU with integrated current metering and monitoring
Features
• 12 Power Ports individually switchable directly on the device,
via HTTPS, SNMP, command line tool and RS232 serial interface
• Status and Power-up delay (0...9999 seconds) adjustable
individually for each Power Port after power blackout
• Latency time of 1 second prevents simultaneous power-up of
multiple Power Ports
• Paired switching of outlets possible, e.g. output 1 of bank 1
simultaneously with output 1 of bank 2
• Programmable turn-on/turn-o sequence
• 2 energy meters per bank and for 8226-1 also per load outlet;
one meter continuously, the other resettable
• Metering of energy, current, power factor, phase angle,
frequency, voltage and active / apparent / reactive power
• A clearly visible LED display per bank for total current,
IP address, sensor data and error reports
• 12-channel watchdog, an individual watchdog (ICMP/TCP)
can be assigned for each Power Port
• 2 independent power inputs of 230 V for the same or
dierent phases
• Integrated overvoltage protection prevents damage of device
and of connected consumers (L-N 10 kA), status retrievable
over network
• 2 interfaces for optional sensors for environmental monitoring
(temperature, humidity and air pressure)
• Event-based port switching possible by set sensor thresholds
• Internal beeper for acoustic alarm for sensor thresholds
• Comfortable conguration by web browser, Windows or Linux
tool
• Firmware update via Ethernet during operation
• IPv6-ready
• HTTP/HTTPS, e-mail (SSL, STARTTLS), DHCP, Syslog
• SNMPv1, v2c, v3 (Get/Traps)
• TLS 1.0, 1.1, 1.2
• Telnet, Radius and Modbus TCP support
• Access control via IP Access Control List
• Android and iOS app Gude Control allows access from anywhere
• Low internal power consumption, typ. 5 W/ 7 W (8221-1 /
8226-1)
• Developed and manufactured in Germany
Electrical Connections
• 2 Power supplies IEC C20, max. 16 A, 230 V
• 2 x 6 Power Ports IEC C13, max. 10 A
• Ethernet connector RJ45 (10/100 Mbit/s)
• Serial interface RS232 (Sub-D 9-pin)
• 2 RJ45 interfaces for optional sensors
Technical Details
• Dimensions: 19 inch, 1 rack unit
• LxHxD: 43.9 x 4.4 x 19.5 cm
(without brackets)
• Weight: ca. 2.9 kg
• Operating temperature: 0-50 °C
• Storage temperature: -20 - 70 °C
• Relative humidity: 0 - 95 % (non-condensing environment)