User Manual

Expert Power Control NET 24x

19Expert Power Control NET 24x

5.3 Default settings

In order to restore the default settings EPC NET 24x must be

started in bootloader mode (see 5.1). Besides that the program

GBL_Conf.exe is required.

Run GBL_Conf.exe and select the EPC NET 24x whose set-

tings should be restored. Then click on Program DevicegReset

to Fab default.

Please notice that all current settings will be deleted. The default

settings will be loaded when EPC NET 24x is restarted the next

time.

Factory Settings EPC NET 24x

Name: EPC-NET-24x

IP adress: 192.168.0.2

Netmask: 255.255.255.0

Gateway: 192.168.0.0

DHCP: enabled

Password disabled

HTTP Port: 80

IP ACL: disabled

Power Port 1-24

Name: Power Port 1 - 24

After Reboot: disabled