User Manual
Expert Power Control NET 24x
10
11Expert Power Control NET 24x
Conguration - SNMP Trap Receiver List
Enable Traps
Here you can activate
SNMP-traps. if ena-
bled, EPC NET 24x will
dispatch SNMP-traps
to all receivers listed.
Receivers have to be
listed as follows: IP ad-
dress (and, if necessary
the HTTP port) e.g.:
192.168.0.223:8000
Trap Version
Here you can choose
between SNMP-traps
standard 1 and 2c.
Use SNMP only if your network is tted for.
More information about the SNMP functions of EPC NET 24x,
you can nd in chapter 3.5, on http://www.gude.info/wiki or ask
our support team.
Figure 9 Cong - SNMP Traps