Datasheet

Switched & Metered Power Distribution Units
04/2019
[e-mail]
www.gude.info
shop.gude.info
Gude Analog- und Digitalsysteme GmbH
Eintrachtstr. 113
50668 Koeln
•
Germany
T
+49.221.912 90 97
F +49.221.912 90 98
new
Switchable IP Power Sockets for all needs: New Expert Power Control Series
From conference rooms to data centers: Expert Power Control 8021, 8031 and 8041 Series
new
IPv6
HTTPS
SSL
SNMPv3
Telnet
Modbus TCP
1 Green Building
With the new IP switching sockets, the
power consumption of the installation
can be e ectively reduced: The
collective switching o of consumers,
even in standby mode, as well as
the integrated energy meters help
to ensure a sustainable operation of
the infrastructure. In addition, the
user receives warnings when fault
currents occur. This allows preventive
maintenance even before downtime.
2 „Reboot is always good“
The PDUs have 4, 8 or 12 load outlets
on the rear (IEC C13 or safety socket).
This allows connected devices to be
switched o and on in the event of
a fault. This is especially possible
via media controls and DCIM solu-
tions. Defi ned thresholds ensure that
event-based switching can be initi-
ated. Furthermore, the devices can be
controlled on schedule due to inte-
grated timer functions.
3 Environment monitoring
Two integrated sensor interfaces for
optional available sensors enable to
monitor environment temperature,
humidity and air pressure. Due to real-
time surveillance and early overload
and threshold alarms, critical system
conditions and down-times can be
avoided. Thanks to plug-and-play
sensors, startup operation with Expert
Power Control Series is quickly done.
Triple Play of the new Expert Power Control Series
Electrical Connections
• Power supply IEC C20, max. 16 A, 230 V
• Power Ports: 4, 8 or 12 IEC C13 (Lock), max. 10 A
or 8 safety socket type F, max. 16 A
• Ethernet connector RJ45 (10/100 Mbit/s)
• Serial interface RS232 (Sub-D 9-pin)
• 2 RJ45 interfaces for optional sensors
Technical Details
• Dimensions: 19 inch, 1 rack unit
• LxHxD: 43.9 x 4.4 x 17.8 cm
(without brackets)
• Weight: ca. 2.2 kg
• Operating temperature: 0-50 °C
• Storage temperature: -20 - 70 °C
• Relative humidity: 0 - 95 %
(non-condensing environment)
The following data center scenario serves as an application example for
new Expert Power Control Series: A standard 19 inch rack with 12 servers
is deployed with customer critical applications running on the servers. The
user‘s target: to implement a reliable power distribution as well as an intelli-
gent device managment regarding capacitiy and system monitoring - all at
a reasonable cost-benefi t ratio. With the new series of switchable IP power
distributors, central objectives in the IT infrastructure can be achieved:
 Enhancement of energy e ciency
 Metering of energy consumption on rack and server level in real time
 Implementation of a reliable environment monitoring
 Prevention of down-times and of system critical conditions by
residual current monitoring
 To ensure instant remote access in case of need
 Support of commonly used authentifi cation and encryption protocols
gude-steckbrief_epc2019.indd 60 24.06.2019 14:05:01