Operation Manual

17
GB
ENGLISH
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
In case of any doubts about connection and operati-
on refer please to our customer center
Speci ed Conditions Of Use
The string trimmer has been designed to cut grass
and weed in gardens and along  ower beds and
borders.
Do not use this product in any other way as stated for
normal use. Not observing general regulations in force
and instructions from this manual does not make the
manufacturer liable for damages.
Technical Data
Grass trimmer 250/18 RT Set
Art. No
95781
Voltage 18 V
Cutting width 250 mm
Retractable telescopic handle 1120-1270 mm
Weight without battery/Charging equipment 1,54 kg
Noise details
Sound pressure level L
pA
1)
78 dB (A)
Vibration value measured L
WA
1)
87,9 dB (A)
Guaranteed sound power level L
WA
2)
91 dB (A)
Measured according to
1)
EN 60745;
2)
2000/14/EG; Uncertainty K = 3 dB (A)
Wear ear protectors!
Vibration details
Total vibration values (triaxial vector sum) Determined properly EN 60745
Vibration emission value a
h
< 2,5 m/s
2
Uncertainty K = 1,5 m/s
2
WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and
may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load shouldalso take into account the times when the tool isshut down
or when it is running but not actually inuse. This may signi cantly reduce the vibratoryload over the total
working period.
Identify additional safety measures to protect theoperator from the e ects of vibration such as:maintain the
tool and the accessories, keep thehands warm, organisation of work patterns.
Battery-Charging equipment JLH08******G 18 V
Input voltage 100-
240 V~
Frequency 50-60 Hz
Output voltage 21 V
Output current 0,35 A(Std.)
Input power 12 W
Protection class II