Operation Manual

3 Technical Data

GSS 700 P

Power connection

230V/50 Hz

Frequency/Protection type

IP 44

Max. output P

Motor speed

370 W/P1/S6/40%

280 min-

Approximate Grinding wheel

diameter:

125 x 32 mm

Grinding wheel setting angle

2 x 30°

Supporting bench setting angle :

30° left/80° right

Saw disc clamping adapter :

35 mm, 30 mm, 28 mm, 25,4 mm, 25 mm, 18 mm, 16 mm

Connection cable:

1,5 m/H05 VV-F

Approximate weight

38 kg

Acoustic output level :

73 dB (A)

Dimension L x W x H (mm):

670 x 390 x 310

Ordering No. .:

94220

4 Transportation and Storage

The unit has been designed for stationary use only.

Any tools that are not routinely used should be stored in a dry locked room.

5 Assembly and Initial Operation

The unit is delivered assembled. It only needs to unpack.

• Wipe metal parts of the slide regularly with an oil-soaked cloth and lubricate the spindle before every

use.

5.1 Initial Operation Safety Instructions

• Mind safe attachment of the unit to suitable surface.

• Make sure that all the screws are tight.

5.2 Procedure

• Assemble individual parts in the shown order. Mind the correct arrangement of the parts according to

figures.