Full Product Manual
Table Of Contents
- Table of Contents
- Section 1: Safety Rules & General Information
- Section 2: General Information
- Section 3: Operation
- Site Prep Verification
- Generator Enclosure
- Control Panel Interface
- Using the AUTO/OFF/MANUAL Interface
- Interface Menu Displays
- Setting the Exercise Timer
- Battery Charger
- Manual Transfer Operation
- Automatic Transfer Operation
- Automatic Sequence of Operation
- Shutting Generator Down While Under Load Or During An Extended Outage
- Section 4: Maintenance
- Maintenance
- Preparing for Maintenance
- Performing Scheduled Maintenance
- Service Schedule
- Checking Engine Oil Level
- Changing the Oil and Oil Filter
- Servicing the Air Cleaner
- Spark Plugs
- Valve Clearance Adjustment
- Battery Maintenance
- Cleaning the Sediment Trap
- Attention After Submersion
- Corrosion Protection
- Remove From, and Return To Service Procedure
- Section 5: Troubleshooting / Quick Reference Guide
General Information
6 Owner’s Manual for 60 Hz Air-Cooled Generators
Figure 2-2. 11kW–22kW—Components and Control Locations
A. Lock with Cover E. Battery Compartment
(Battery not supplied)
J. Oil Fill Cap N. Sediment Trap
B. Main Line Circuit
Breaker (Generator
Disconnect)
F. Exhaust Enclosure K. Oil Filter O. Fuel Regulator
C. Airbox with Air Cleaner G. Status LED Indicators L. Composite Base P. Fuel Inlet
D. Control Panel H. Oil Drain M. Oil Dipstick Q. Data Plate Location
001786
A
C
E
B
D
F
A
G
H
K
J
L
M
N
O
P
Q