Product Manual

User Manual

Page 8

Issue 1

Rope Lock-off

To prevent pay out of rope and therefore halting descent there are integrated

rope lock-off points on each side of a MAX descender (R/PR models only).

Take rope entering the device

(non load bearing end)

Step 2:

Run the rope over the rope hook away

from the red plate

Step 3:

Thread the rope through the rope grip,

.... and pull to engage in grip

Step 1:

Take non load bearing rope entering the

device and pass it under the rope hook,

towards the red plate

Step 2:

Align the rope with the rope guide

Step 3:

Lay the rope across the full width of the

descender through the rope guide.

Step 4:

Run the rope under the rope hook away

from the red plate and finally through the

rope grips

Standard (Method 2)

Inverted (Method 3)