Product Manual

All Checkmate products are manufactured
under ISO 9001:2008 and to the highest
standards. The scope of use within the
certification held allows Checkmate to
design, manufacture and test Personal
Protection Equipment.
Horizontal tensile test machine, abrasion
tester and dynamic drop test rig are just
part of the full range of test facilities used
to ensure ultimate safety of our product
range.
All Checkmate devices must only be
installed by Checkmate personnel or a
trained operator. Strict training is given
and written exams are completed before
full certification can be given to operators.
(EC type examination for Directive
89/686/EEC by SGS United Kingdom
Limited. Weston-super-Mare, BS22 6WA.
UK. (Notified Body No. 0120.)
The MAX 150/150R/150PR have been
designed to meet the requirements of ANSI
Z359.4 2013 & OSHA 1926 Subpart M.
User Manual
Page 12
Issue 1
Quality, Legislation & Exclusions
Checkmate holds global product liability
cover for your safety.
Checkmate will NOT however be
responsible for:
a) Users who are out of the scope of any
written manuals of training given.
b) Any device that has NOT been
inspected under the current
legislation and manufacturers
guidelines.
c) Devices that have been damaged.
d) When the maximum weight in lbs has
been exceeded.
e) Devices that have NO serial number
markings, and the manufacturers
name, Checkmate Lifting & Safety Ltd,
is not present.
Quality Exclusions
Legislation & Standards