Product Manual

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
7 85366 (Rev. E)
Labels
STANDARDS:
OSHA 1910 & OSHA 1926 Subpart M
ANSI Z359.14-2014 & ANSI A10.32-2012
Assembled in USA
90951 (Rev. D)
GR11
SPECIFICATIONS:
• Avg. arresting force: 1,350 lbs. • Webbing: 11’ HMPE, 13/16" width.
WARNING: Manufacturer's instructions supplied with product must be read prior to use.
Failure to follow instructions may result in serious injury or death. Never modify product.
NOT REPAIRABLE. DO NOT REMOVE THIS LABEL.
USE: Maximum 2’ free fall. Anchor point must never be positioned more than 2’ below
harness D-ring. Free fall increases deceleration distance. Never for leading edge (LE) use.
Avoid lifeline contact with sharp edges both during work and in event of a fall. For use by
trained users only. Maximum one user. Ensure connection to anchorage is secured
properly before use. May be used as a component of a PFAS in HLL applications.
INSPECTION: Inspect prior to each use per instructions, including for signs of deployment,
locking function (pull sharply to test), retraction function, legibility of labels, evidence of
defects, damage, or missing parts, and condition of connectors, housing, and lifeline (inspect
full length). Inspection by Competent Person required at least every 12 months. Immediately
remove from service in event of failed inspection or if unit is subjected to a fall.
ANCHOR POINT AT/ABOVE D-RING: ANCHOR POINT
BELOW D-RING (2’ MAX.):
Capacity: 130 - 310 lbs.
Max. deceleration distance: 59”
Min. fall clearance: 10’5”.
PART #:
32080
DOM:
LOT #:
Capacity: 130 - 310 lbs.
Max. deceleration distance: 24”.
Min. fall clearance: 5’6”.
Class A SRL.
Capacity: 311 - 420 lbs.
Max. deceleration distance: 84”.
Min. fall clearance: 10’6”.