Product Manual

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
7
85219 (Rev. D)
Labels
Material:
Polyester and
galvanized steel.
For use only with
other OSHA and ANSI
compliant equipment
as part of a complete
personal fall arrest
system. Improper use
of this product could
result in serious injury
or death. Avoid
contact with sharp
edges and abrasive
surfaces that can cut
or damage the
webbing or
components.
Make only safe,
compatible
connections.
Immediately remove
this lanyard from
service if exposed to
forces of fall arrest.
Prior to use, fully read
and understand all
manufacturer’s
instructions provided
with this lanyard at
time of shipment
from manufacturer.
!
WARNING
Big Boss Lanyard
Compliant with OSHA
1926 Subpart M, ANSI
Z359.13-2013, and
ANSI A10.32-2012.
Capacity:
130-310 lbs. (including
tools) up to 12 ft. free
fall. 311-420 lbs.
(including tools) up to
6 ft. free fall.
Maximum
Elongation:
60”
Attach shock
absorber end of
lanyard to fall arrest
D-ring on harness.
DO NOT
REMOVE LABELS
90033 (Rev. B)
Warning: User Capacity Range 130-310 lbs.
1,350lbs.
Forces may increase when cold and/or wet
Read Instructions Before Use
Maximum Free Fall Average Arresting Force
12ft.
Maximum Deployment Distance 60”
Serial Number:
Date of Manufacture:
Model Number:
Length:
USER MUST INSPECT BEFORE EACH USE. Competent Person to inspect and initial at least every 6 months. Date of First Use (please complete) _____________ Product lifetime is indefinite, as long as product passes all inspection requirements.