Product Manual

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
4
Installation and Use
Tie-Back Leg
Extension Leg
Standard 6’ Leg
Shock Absorbing Leg
Prior to use, plan your system:
1. Prior to use, inspect Guardian 4-in-1 Big Boss Lanyard and all PFAS equipment to be used in combination
with 4-in-1 Big Boss Lanyard.
2. Ensure that all connectors and all other components of the PFAS are compatible with Guardian 4-in-1 Big
Boss Lanyard, and are selected by a Competent Person. The selected safety harness MUST be of proper size,
and MUST be fitted snugly, but still allow for a full range of movement.
3. Make considerations for eliminating or minimizing swing fall hazards.
4. Ensure structure to which the anchorage connector is attached is capable of withstanding a MINIMUM load
relative to the application in which the 4-in-1 Big Boss Lanyard is to be used.
Installation:
1. Attach 4-in-1 Big Boss Shock Absorber to compatible harness D-ring, OR attach Extension Lanyard Leg to
compatible harness D-ring with compatible connector.
2. Attach 4-in-1 Big Boss Standard 6’ Leg to compatible anchorage connector, OR attach Tie-Back Leg around
compatible structural anchor. If using lanyard with rebar hook end, rebar hook must NEVER be attached to
harness D-ring, and must ONLY be attached to compatible structural anchor.
3. NEVER work with both Standard 6’ Leg and Tie-Back Leg connected; attach unused leg to compatible
harness lanyard keeper. ALWAYS maintain 100% tie-off.
4. MAXIMUM 1 PFAS per 4-in-1 Big Boss Lanyard.