Product Manual

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
3
Components and Specifications
Compatibility: When making connections with 4-in-1 Big Boss Lanyard, eliminate all possibility of roll-out.
Roll-out occurs when interference between a hook and the attachment point causes the hook gate to
unintentionally open and release. All connections must be selected and deemed compatible with 4-in-1 Big
Boss Lanyard by a Competent Person. All connector gates must be self-closing and self-locking, and withstand
minimum loads of 3,600 lbs. See the following for examples of compatible/incompatible connections:
Connector
closed and
locked to
D-ring. OK.
Two or more
snap hooks or
carabiners
connected to
each other. NO.
Two connectors
to same
D-ring. NO.
Connector
directly to
horizontal
lifeline. NO.
Connector
to integral
lanyard.
NO.
Connector
directly to
webbing.
NO.
Application
that places
load on gate.
NO.
Incompatible
or irregular
application,
which may
increase risk
of roll-out. NO.
Materials: nylon, polyester, and galvanized steel.
Tie-Back Leg
Extension Leg
Standard 6’ Leg
Shock Absorber
Part # Length Description
11520
11521
11522
6’
6’
6’
4-in-1 Big Boss Lanyard w/18” D-ring Extension, & Tie-Back Leg
4-in-1 Big Boss Lanyard w/Bungee Leg, Rebar Hook, & Tie-Back Leg. No D-ring extension.
4-in-1 Big Boss Lanyard w/18” D-ring Extension & (2) Tie-Back Legs