Product Manual

Installation and Use
Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 USA phone: [phone] fax: [phone] www.guardianfall.com
4
1. Prior to use, inspect Guardian Internal Shock Lanyards and all PFAS equipment to be used in combination
with Internal Shock Lanyards.
2. Ensure that all connectors and all other components of the PFAS are compatible with Guardian Internal
Shock Lanyards, and are selected by a Competent Person. The selected safety harness MUST be of proper size,
and MUST be fitted snugly, but still allow for a full range of movement.
3. Make considerations for eliminating or minimizing swing fall hazards.
4. Ensure structure to which the anchorage connector is attached is capable of withstanding a MINIMUM load
relative to the application in which the Internal Shock Lanyard is to be used.
5. Attach lanyard snap hook or rebar hook to compatible harness D-ring or structural anchor. For lanyards with
two, integrally connected legs, only attach the central snap hook to the applicable harness D-ring.
6. Attach remaining snap hook or carabiner end of lanyard to compatible anchorage connector. Rebar Hooks
MUST ONLY be connected to structural rebar. Ensure that all connectors are self-closing and self-locking, and
that there is no risk of roll-out. ALWAYS maintain 100% tie-off.
7. NEVER work with employed harness D-ring positioned above the anchorage connector, unless permitted by
specific application or combination of equipment. A Competent Person must make a determination regarding
the acceptability of working above an anchorage connector.
8. Only use Guardian Lanyards in the fall protection application(s) for which they are designed. Refer to
product labeling, or contact Guardian Fall Protection if unsure of proper application(s).
Part # Length Description
11200
11201
11202
11203
01295
01296
6’
6’
6’
6’
4½’ - 6’
6’
21215
4½’ - 6’
Single Leg
Single Leg w/Rebar Hook
Double Leg
Double Leg w/Rebar Hooks
Stretch Lanyard, Single Leg
Double Leg w/Aluminum Rebar Hooks
Stretch Lanyard, Double Leg
01297 4½’ - 6’ Stretch Lanyard, Single Leg w/Rebar Hook
01298 4½’ - 6’ Stretch Lanyard, Double Leg w/Rebar Hook
11211
11212
11213
4½’ - 6’
4½’ - 6’
4½’ - 6’
Stretch Lanyard, Single Leg w/Black Web
Stretch Lanyard, Double Leg w/Black Web & Rebar Hook Ends
Stretch Lanyard, Single Leg w/Black Web & Rebar Hook End
11260
11261
6’
6’
Surfacetech Web, Single Leg
Surfacetech Web, Double Leg w/Rebar Hook Ends