Product Manual

Labels
Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
11 85391 (Rev. B)
ANSI Z359.14-2014
ANSI A10.32-2012
OSHA 1910, &
OSHA 1926 Subpart M
rated to 0.005”
radius edge
INSPECTION: Prior to each use, inspect device per
instructions, including locking function (sharp pull to
test), retraction function, legibility of labels, evidence
of defects, damage, or missing parts, and condition of
connectors, housing, fasteners, and lifeline (inspect full
length). Inspection by Competent Person required at
least every 12 months. Immediately remove from service
if evidence of shock pack deployment is found.
SPECIFICATIONS:
Lifeline: 8’ Galvanized Steel Cable, 3/16”
Average arresting force: 900 lbs.
(LE Use):
Capacity range: 130 - 310 lbs.
Min. setback distance from edge: 0’
Max. arresting distance: 54” - 102”
Free fall: 5’ max.
Min. fall clearance: 13’ - 17’
(Non-LE Use):
Capacity range: 130 - 420 lbs.
Max. arresting distance: 54”
Free fall: 2’ max.
Min. fall clearance: 9’
Class B SRL
WARNING: Prior to use, fully read and understand all
manufacturer’s instructions provided with equipment
at time of shipment.
DO NOT ATTEMPT TO SELF SERVICE OR REPAIR!
DO NOT REMOVE THIS LABEL.
USE: This device is only for use by one person as a fall
arrester. Only make connections directly to attachment
point on safety harness. Ensure that connection to
anchorage is secured properly before use. Avoid lifeline
contact with thermal, electrical, and chemical hazards.
Lifeline may contact sharp or abrasive edges and
surfaces, but avoid if possible. May be used as a
component of a PFAS in HLL applications. Design,
installation, and utilization of HLLs must be
supervised by a Qualified Person. Suitable for
horizontal use. Competent Person must calculate
fall clearance prior to use; fall clearance
calculations must include considerations for
swing fall. Clearance numbers specified
based on lifeline installed vertically
overhead and in-line with worker.
STEEL SH
MOUSQUETON EN ACIER /GANCHO DE SEGURIDAD DE ACERO
11100
Assembled in USA
91114 (Rev. B)
Lot #
# de lote
# de lot
Serial #
# de Série
# de Série
Mfg. Date
Fecha de Fabricación
Date de Fabrication