Product Manual

Prior to EACH use, inspect Diablo 2.5 Cable SRL-LE for deficiencies, including, but not limited to, corrosion,
deformation, pits, burrs, rough surfaces, sharp edges, cracking, rust, paint buildup, excessive heating,
alteration, broken stitching, fraying, bird-caging, and missing or illegible labels.
Pay careful attention to cable swage (located beneath rubber stopper) and ensure no damage is present at
location where swage contacts lifeline. IMMEDIATELY remove Diablo 2.5 Cable SRL-LE from service if defects or
damage are found, or if exposed to forces of fall arrest. Ensure fall arrest indicator (broken stitching at location
shown below) is not deployed. During inspection, consider all applications and hazards Diablo 2.5 Cable SRL-LE
has been subjected to.
Ensure that applicable work area is free of all damage, including, but not limited to, debris, rot, rust, decay,
cracking, and hazardous materials. Ensure that selected work area will support the application-specific
minimum loads set forth in this instruction manual. Work area MUST be stable.
At least every 12 months, a Competent Person other than the user must inspect Diablo 2.5 Cable SRL-LE.
Competent Person inspections MUST be recorded in inspection log in instruction manual and on
equipment inspection grid label. The Competent Person must sign their initials in the box
corresponding to the month and year the inspection took place.
Immediately remove from service if indicator stitching shows any signs of damage:
Inspection
Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
8
Intact indicator stitching - OK to use.
Broken/damaged indicator stitching - Immediately remove from service!