Product Manual

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
10 85369 (Rev. A)
INSPECTION: Prior to each use, inspect device
per instructions, including locking function
(sharp pull to test), retraction function, legibility
of labels, evidence of defects, damage, or missing
parts, and condition of connectors, housing,
fasteners, and lifeline (inspect full length).
Inspection by Competent Person required at least
every 12 months. Immediately remove from service
if evidence of shock pack deployment is found.
SPECIFICATIONS:
Lifeline: 8’ Galvanized Steel Cable, 3/16”
Tie-Back Webbing: 3’, 1” Width
Average arresting force: 1,350 lbs.
(LE Use):
Capacity range: 130 - 310 lbs.
Min. setback distance from edge: 0’
Max. arresting distance: 54” - 102”
Free fall: 5’ max.
Min. fall clearance: 13’ - 17’
(Non-LE Use):
Capacity range: 130 - 420 lbs.
Max. arresting distance: 24”
Free fall: 2’ max.
Min. fall clearance: 5.5’
WARNING: Prior to use, fully read and understand
all manufacturer’s instructions provided with
equipment at time of shipment.
DO NOT ATTEMPT TO SELF SERVICE OR REPAIR!
DO NOT REMOVE THIS LABEL.
USE: This device is only for use by one person as a
fall arrester. Only make connections directly to
attachment point on safety harness. Ensure that
connection to anchorage is secured properly before
use. Avoid lifeline contact with thermal, electrical,
and chemical hazards. Lifeline may contact sharp
or abrasive edges and surfaces, but avoid if
possible. Never install such that tie-back
webbing can impact edge of fall hazard. May be
used as a component of a PFAS in HLL
applications. Design, installation, and
utilization of HLLs must be supervised by a
Qualified Person. Suitable for horizontal
use. Competent Person must calculate fall
clearance prior to use; fall clearance
calculations must include
considerations for swing fall.
Clearance numbers specified
based on lifeline installed
vertically overhead and
in-line with worker.
Serial #
# de Série
# de Série
Mfg. Date
Fecha de Fabricación
Date de Fabrication
Part #: 11098
STEEL SH
MOUSQUETON EN ACIER
GANCHO DE SEGURIDAD DE ACERO
Made in Taiwan
90977 (Rev. A)