Item Brochure

Part # lengthDescription
11097 8’
Diablo Cable Tie-Back SRL-LE with Steel Tie-Back Hook
Double Diablo Cable Tie-Back SRL-LE with Steel Tie-Back Hooks
11098
8’
STANDARDS:
OSHA 1926 Subpart M & 1910
ANSI Z359.14-14 & A10.32-12
MATERIALS:
8’, 3⁄16” Width Galvanized Cable,
Polyester, Aluminum, & Stainless Steel
NOTES:
• Maximum one user per SRL
• Always maintain 100% tie-off
• LE Use Clearance Requirement: 17’
• Non-LE Use Clearance Requirement: 7.5’
WORKER CAPACITY:
• Capacity range for LE: 130 -310 lbs.
• Capacity range for Non-LE: 130-420 lbs.
PERFORMANCE:
• Average Arrest Force: 1,350 lbs.
• Tie-Back Webbing: 3’, 1” Width
• Maximum Arrest Force: 1,800 lbs.
• Maximum Deceleration Distance
(for non-LE applications): 24”
Personal Fall Arrest:
Diablo Cable Tie-Back SRL-LEs may be used in
Personal Fall Arrest applications to support:
- Maximum 1 Personal Fall Arrest System (PFAS).
Structure must withstand loads applied in the
directions permitted by the system of at least
5,000 lbs.
- Maximum permitted free fall is 5’ for LE
applications and 2’ for non-LE applications.
- Applicable D-rings: Dorsal.
Restraint:
Diablo Cable Tie-Back SRL-LEs may be used
in Restraint applications. Restraint systems:
- Prevent workers from reaching the leading
edge of a fall hazard.
- Always account for fully deployed length of
SRL. Structure must withstand loads applied
in the directions permitted by the system of
at least 1,000 lbs.
- No free fall is permitted.
- May only be used on surfaces with slopes
up to 4/12 (vertical/horizontal).
- Applicable D-rings: Dorsal, Chest,
Side, & Shoulder.
specifications
Need more information?
P: 1.800.466.6385 | visit our website: guardianfall.com
applications