Product Name: Diablo SRL Part #: 11016; 11017; 11018; 11019; 11050; 11051; 11052; 11053; 11054; 11060 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction 1 Applicable Safety Standards 1 Worker Classifications 1 Product Specific Applications 2 Limitations 2-3 Components and Specifications 3-4 Installation and Use 4 Maintenance, Cleaning, and Storage 5 Inspection 5 Inspection Log 5 Safety Information 6 Labe
Serial #: Trainer: User: Applicable Safety Standards When used according to instruction specifications, this product meets or exceeds all applicable OSHA 1926 Subpart M, OSHA 1910, ANSI Z359.14-2014, and ANSI A10.32-2012 standards for fall protection. Applicable standards and regulations depend on the type of work being done, and also might include state-specific regulations. Consult regulatory agencies for more information on fall protection systems and associated components.
www.guardianfall.com phone: (800) 466-6385 fax: (800) 670-7892 6305 S. 231st St., Kent, WA 98032 Guardian Fall Protection Product Specific Applications ! WARNING Use of equipment in unintended applications may result in serious injury or death. Maximum 1 attachment per connection point. Personal Fall Arrest: Diablo SRL may be used to support a MAXIMUM 1 PFAS for use in Fall Arrest applications. Structure must withstand loads applied in the directions permitted by the system of at least 5,000 lbs.
Two connectors to same D-ring. NO. Connector directly to webbing. NO. Incompatible or irregular application, which may increase risk of roll-out. NO. Connector directly to horizontal lifeline. NO. Two or more snap hooks or carabiners connected to each other. NO. Components and Specifications Materials: stainless steel, glass-filled nylon, polyester, and galvanized steel or aluminum. Class A SRL Average arrest force: 1,350 lbs. Maximum arrest force:1,800 lbs. Maximum deceleration distance: 24”. Min.
www.guardianfall.com phone: (800) 466-6385 fax: (800) 670-7892 Guardian Fall Protection Diablo SRLs MUST NEVER be used in Leading Edge (LE) applications. Maximum permitted free fall is 2’. ALWAYS avoid lifeline contact with sharp or abrasive edges and surfaces. For Double-Leg Kits (Part #s: 11051, 11052, 11053, 11054), assemble and use SRL according to instruction sheet provided with Dual SRL Bracket (part # 11058). 1.
When not in use, store equipment where it will not be affected by heat, light, excessive moisture, chemicals, or other degrading elements. Inspection Prior to EACH use, inspect Diablo SRL for deficiencies, including, but not limited to, corrosion, deformation, pits, burrs, rough surfaces, sharp edges, cracking, rust, paint buildup, excessive heating, alteration, and missing or illegible labels.
www.guardianfall.com phone: (800) 466-6385 fax: (800) 670-7892 6305 S. 231st St., Kent, WA 98032 Guardian Fall Protection Safety Information ! WARNING Failure to understand and comply with safety regulations may result in serious injury or death. Regulations included herein are not all-inclusive, are for reference only, and are not intended to replace a Competent Person’s judgment or knowledge of federal or state standards. Do not alter equipment. Do not misuse equipment.
www.guardianfall.com Labels EN ALUMINIUM / GANCHO PARA VARILLA DE ALUMINIO STEEL RH ARMATURE CROCHET EN ACIER / GANCHO PARA VARILLA DE ACERO 11018 11019 Custom # Serial # # Costumbre # Coutume # de Série # de Série ANSI Z359.14-2014, ANSI A10.32-2012, OSHA 1910, & OSHA 1926 Subpart M WARNING: Manufacturer's instructions supplied with this product at time of shipment must be read prior to use. Instructions must be followed for proper use, maintenance, and inspection.
