Product Manual

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
7
Labels
85326 (Rev. A)
10967 50’; 3/16” CABLE
WARNING:
Prior to use, fully
read and understand all
manufacturer’s
instructions provided with
equipment at time of
shipment.
DO NOT ATTEMPT
TO SELF SERVICE
OR REPAIR!
DO NOT REMOVE
THIS LABEL.
USE:
This device is only
for use by one
person as a fall
arrester. Only make
connections directly
to attachment point
on safety harness.
Ensure that
connection to
anchorage is
secured properly
before use. Avoid
lifeline contact
with thermal,
electrical, and
chemical hazards.
Lifeline may contact
sharp or abrasive
edges and surfaces,
but avoid if possible.
May be used as a
component of a
PFAS in HLL
applications. Design,
installation, and
utilization of HLLs
must be supervised by
a Qualified Person.
Suitable for horizontal
use. Competent Person
must calculate fall
clearance prior to use;
fall clearance calculations
must include considerations
for swing fall. Clearance
numbers specified based on
lifeline installed vertically
overhead and in-line
with worker.
MADE IN
U.S.A.
INSPECTION:
Prior to each use, inspect
device per instructions,
including locking function
(sharp pull to test), retraction
function, legibility of labels,
evidence of defects, damage,
or missing parts, and
condition of connectors,
housing, fasteners, and
lifeline (inspect full
length). Inspection by
Competent Person
required at least every 6
months. Immediately
remove from service if
evidence of shock pack
deployment is found.
SPECIFICATIONS:
Average arresting
force: 900 lbs.
(LE Use):
Capacity range:
130 - 310 lbs.
Min. setback
distance from
edge: 0’
Max. arresting
distance: 54” - 102”
Free fall: 6’ max.
Min. fall clearance:
17’ - 21’
(Non-LE Use):
Capacity range:
130 - 420 lbs.
Max. arresting distance:
54”
Free fall: not permitted
Min. fall clearance: 9’
Class B SRL
90150 (Rev. H)
Date of First Use Mfg. Date
J F M AA JM J S O N D
YR
YR
YR
YR
YR
Serial #
CUSTOM #
10968 50’; 3/16” GALV. CABLE
10967 50’; 3/16” CABLE 10967 50’; 3/16” CABLE 10967 65’; 3/16” GALV. CABLE
10967 50’; 3/16” CABLE 10967 50’; 3/16” CABLE 10980 65’; 3/16” STAINLESS CABLE
10967 50’; 3/16” CABLE 10967 50’; 3/16” CABLE 10979 50’; 3/16” STAINLESS CABLE