Product Manual

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
7
85210 (Rev. J)
Labels
R
E
T
R
A
C
T
A
B
L
E
V
E
L
O
C
I
T
Y
Serial # Mfg. Date
CUSTOM
WARNING: Prior to use, fully read and
understand all manufacturer’s instructions provided
with equipment at time of shipment.
DO NOT ATTEMPT TO SELF SERVICE
OR REPAIR! DO NOT REMOVE THIS LABEL.
USE: This device is only for use by one person as a fall
arrester. Only make connections directly to attachment point
on safety harness. Ensure that connection to anchorage is
secured properly before use. Avoid lifeline contact with sharp
or abrasive edges and surfaces, and thermal, electrical, and
chemical hazards. May be used as a component of a PFAS in
HLL applications. Design, installation, and utilization of
HLLs must be supervised by a Qualified Person. Unsuitable
for horizontal use. Competent Person must calculate fall
clearance prior to use; fall clearance calculations must
include considerations for swing fall. Clearance number
specified is based on lifeline installed vertically overhead
and in-line with worker.
INSPECTION: Prior to each use, inspect device
per instructions, including locking function (sharp
pull to test), retraction function, legibility of labels,
evidence of defects, damage, or missing parts, and
condition of connectors, housing, fasteners, and lifeline
(inspect full length). Inspection by Competent Person
required at least every 6 months. Immediately remove from
service if impact indicator on hook displays red.
SPECIFICATIONS:
Capacity range: 130 - 310 lbs.
Average arresting force: 900 lbs.
Max. arresting distance: 54”
Min. Fall clearance: 9’
Class B SRL
STANDARDS:
ANSI Z359.14-14 & ANSI A10.32-12
OSHA 1926 Subpart M & OSHA 1910
Made in India 90728 (Rev. A)
Part #
Length & Material
J F M AA JM J S O N D
YR
YR
YR
YR
YR
Date of First Use