Rescue Ladder Basic Kit Model: 10819 18ft (5.48m) IMPORTANT!!! ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH. USERS SHOULD BE FAMILIAR WITH PERTINENT REGULATIONS GOVERNING THIS EQUIPMENT. ALL INDIVIDUALS WHO USE THIS PRODUCT MUST BE PROPERLY INSTRUCTED ON HOW TO USE THIS DEVICE. V1.
Read This Instruction Manual Carefully Before Using This Equipment. User Instructions must always be available to the user and are not to be removed except by the user of this equipment. For proper use, see supervisor, User Instructions, or contact the manufacturer. Compliant fall protection and emergency rescue systems help prevent serious injury during fall arrest. Users and purchasers of this equipment must read and understand the User Instructions provided for correct use and care of this product.
ANSI Z359.12 Steel locking Carabiner 18ft (5.48m) 1ft (305mm) Rung to Rung Webbing Ladder Component Materials: Ladder: Nylon Webbing Rungs: Plastic sleeve, webbing reinforced with Aluminum Carabiner: Zinc Plated Steel Drop-in Bag: Ballistic Nylon Performance: Maximum capacity: one worker with max weight of 310-lbs. Weight: 7.
Step 1.) *Rescuer must follow all personal fall protection guidelines per their governing body. Assessment: Check fall victim for consciousness. (Worker must verbally respond and be uninjured and able to climb. If worker is injured or unconscious a trained rescue response team must perform rescue and use proper equipment.) If worker is conscious know how and where the ladder will be deployed. WORK SURFACE Step 2.
Step 3.) Deployment: Once the rescue ladder system is anchored drop the bag to deploy the Rescue Ladder. Avoid hitting the fall victim while deploying the ladder. WORK SURFACE Step 4.) Climbing: Once the rescue ladder has been dropped the fall victim can start climbing to safety. WARNING: DO NOT REMOVE ORGINAL FALL PROTECTION RESTRAINT.
Notes:
MAINTENANCE, CLEANING AND STORAGE Do not use any corrosive chemicals that could damage the product. Use compressed air to clean only. Store in a cool, dry, clean environment, out of direct sunlight and free of corrosive or other degrading elements. INSPECTION AND MAINTENANCE LOG MODEL NUMBER: DATE OF MANUFACTURE: Date Part Number Comments Inspector Name Inspection: Official periodic inspection must be made at least semi-annually.
Product Warranty, Limited Remedy and Limitation of Liability WARRANTY: THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Equipment offered by Guardian Fall Protection is warranted against factory defects in workmanship and materials for a period of one year from date of purchase or first use by the original owner.
