Product Manual

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
3
Components and Specifications
Compatibility: When making connections with Rope Grab, eliminate all possibility of roll-out. Roll-out occurs
when interference between a hook and the attachment point causes the hook gate to unintentionally open
and release. All connections must be selected and deemed compatible with Rope Grab by a Competent Person.
All connector gates must be self-closing and self-locking, and withstand minimum loads of 3,600 lbs. See the
following for examples of compatible/incompatible connections:
Connector
closed and
locked to
D-ring. OK.
Two or more
snap hooks or
carabiners
connected to
each other. NO.
Two connectors
to same
D-ring. NO.
Connector
directly to
horizontal
lifeline. NO.
Connector
to integral
lanyard.
NO.
Connector
directly to
webbing.
NO.
Application
that places
load on gate.
NO.
Incompatible
or irregular
application,
which may
increase risk
of roll-out. NO.
Materials: galvanized steel, stainless steel, nylon, and polyester.
Part # Description
01500
01503
Rope Grab w/18” Extension Lanyard
01505
01506
01507
01511
Rope Grab w/3’ Shock Absorbing Extension Lanyard
Rope Grab (No Extension)
Removable Positioning Device (No Extension)
Rope Grab w/18” Shock Absorbing Extension Lanyard
Stainless Steel Trailing Rope Grab