Product Manual

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
4
13300, 13310,
13320, 13330,
13340
12305, 12315,
12325, 12335,
12345
02600, 02610,
02620, 02630,
02640
02405, 02415,
02425, 02435,
02445
02305, 02315,
02325, 02335,
02345
02205, 02215,
02225, 02235,
02245
03010, 03020,
03030, 03040
S, M, L,
XL, 2XL
S, M, L,
XL, 2XL
S, M, L,
XL, 2XL
S, M, L,
XL, 2XL
S, M, L,
XL, 2XL
S, M, L,
XL, 2XL
M, L,
XL, 2XL
Orange Hi-Viz Zip On/Off Long Sleeves Tux™ Harness
Blue Duck Flex Construction Tux™
Black Mesh Construction Tux™
Black Duck w/Mesh Construction Tux™
Blue Duck w/Mesh Construction Tux™
Brown Duck w/Mesh Construction Tux™
Camouflage Construction Tux™
02500, 02510,
02520, 02530,
02540
S, M, L,
XL, 2XL
Fire Retardant Construction Tux™
02615, 02625,
02635, 02645
M, L,
XL, 2XL
Rescue/Retrieval Construction Tux™
06500, 06510,
06520, 06530
S, M,
L, XL
Fire Retardant Tux™ w/Front D-ring
02111, 02121,
02131, 02141
02010, 02020,
02030, 02040
02015, 02025,
02035, 02045
02150, 02151,
02153, 02153,
02154
02155, 02156,
02157, 02158,
02159
02160, 02161,
02162, 02163,
02164
S, M, L,
XL, 2XL
S, M, L,
XL, 2XL
S, M, L,
XL, 2XL
M, L,
XL, 2XL
M, L,
XL, 2XL
M, L,
XL, 2XL
Orange Mesh Construction Tux™ w/TB Legs
Sleeveless Zip-In Fleece Liner for Tux™ Harness
Zip-In Fleece Liner for Tux™ Harness w/Long Sleeves
Deluxe Construction Mesh Tux™
w/PT Chest, TB Legs, & Side D-rings. Orange.
Deluxe Construction Mesh Tux™
w/PT Chest, TB Legs, & Side D-rings. Black.
Deluxe Construction Mesh Tux™
w/PT Chest, TB Legs, & Side D-rings. Green.
02300, 02310,
02320, 02330,
02340
S, M, L,
XL, 2XL
Blue Duck w/Fleece Construction Tux™
S, M,
L, XL
22200, 22210,
22220, 22230,
22240
S, M, L,
XL, 2XL
12115, 12125,
12135, 12145
Super Hi-Viz Tux™ - Special Class 2 Design
Fire Retardant Green Mesh Construction Tux™
w/D51 Fabric & RF Silver Reflective Lining
Part # Sizes Description Part # Sizes Description
Installation and Use
All personal fall arrest system (PFAS) equipment must be selected and deemed compatible with
Construction Tux™ Harness by a Competent Person. ALWAYS follow all instructions of all equipment
used in combination with Construction Tux™ Harness. NEVER attach connector to any place on harness
other than D-ring. Connector gate must be self-closing and self-locking, and must withstand minimum
load of 3,600 lbs. Any excess strap webbing MUST be stored in harness Webbing Keepers.
To connect Pass-Through Buckle, angle male buckle so it is positioned to
pass up and through female buckle. Fully insert male buckle so that it lies
flat on top of female buckle.
To adjust dorsal D-ring, slide placard up or down webbing. Dorsal D-ring must rest between the
middle of the shoulder blades.
To connect Tongue Buckle, pull webbing strap through framed tongue component,
and insert framed tongue through grommet to secure.
Roller and Friction Adjustments allow the user to make adjustments to Construction Tux™ Harness
straps. Feed webbing through buckle, and slide the buckle down on the strap to tighten, or slide
the buckle up on the strap to loosen.
Dorsal D-ring, chest strap, shoulder straps, and leg straps
MUST be fitted for each individual user.
1. Hold at dorsal D-ring, and
fully inspect harness according
to specifications of this instruction
manual. Ensure all straps are not
twisted and all buckles are
unfastened.
2. Place harness shoulder straps
over shoulders. Ensure dorsal
D-ring faces out, and is adjusted
to rest between the middle of
the shoulder blades.
3. Connect leg straps around thighs.
Ensure there is no twisting of
webbing. Leg straps should never
dangle or hang loose.