Product Manual

KEEP INSTRUCTIONS AVAILABLE FOR REFERENCE. Record Date of First Use.
Prior to EACH use, inspect Arc-O-Pod for deficiencies, including, but not limited to, corrosion, deformation, pits,
burrs, rough surfaces, sharp edges, cracking, rust, paint buildup, excessive heating, alteration, and missing or
illegible labels. IMMEDIATELY remove Arc-O-Pod from service if defects or damage are found, or if exposed to
forces of fall arrest.
Ensure that applicable work area is free of all damage, including, but not limited to, debris, rot, rust, decay,
cracking, and hazardous materials. Ensure that selected work area will support the application- specific
minimum loads set forth in this instruction manual. Work area MUST be stable.
At least every 6 months, a Competent Person other than the user must inspect Arc-O-Pod.
Competent Person inspections MUST be recorded in inspection log in instruction manual and on
equipment inspection grid label. The Competent Person must sign their initials in the box
corresponding to the month and year the inspection took place.
During inspection, consider all applications and hazards Arc-O-Pod has been subjected to.
Prior to each use, fully inspect and test functionality of Rescue/Confined Space SRL to be used in combination
with Arc-O-Pod. Guardian recommends the use of our 3-Way SRL (#10974, not included):
1) Winch Handle must demonstrate free range of motion, and must not interfere with any other component.
Locking mechanism must secure and release Winch Handle.
2) Pull lifeline sharply to test locking function.
3) Rotate Winch Handle to test retraction and release of lifeline.
4) Fully inspect entire lifeline for damage, including, but not limited to, fraying, crushing, and bird-caging.
Place already inspected lifeline in a bucket or other clean receptacle to prevent accidental damage or
contamination. Always wear gloves when inspecting lifeline.
Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
8
Maintenance, Cleaning, and Storage
If Arc-O-Pod fails inspection in any way, immediately remove it from service, and contact Guardian to inquire
about its return or repair.
Cleaning after use is important for maintaining the safety and longevity of Arc-O-Pod. Remove all dirt,
corrosives, and contaminants from Arc-O-Pod before and after each use. If Arc-O-Pod cannot be cleaned
with plain water, use mild soap and water, then rinse and wipe dry. NEVER clean Arc-O-Pod with corrosive
substances.
When not in use, store equipment where it will not be affected by heat, light, excessive moisture, chemicals,
or other degrading elements.
Inspection