Product Manual

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
6
5. Install Mounting Bracket onto Arc-O-Pod leg:
1) Place Mounting Bracket over leg as shown, so 3-Way SRL snap hook will face up towards Arc-O-Pod Pulley.
2) Select desired height of 3-Way SRL on Arc-O-Pod leg, and place Mounting Bracket at location.
3) Install (2) provided Locking Pins through Mounting Bracket and Arc-O-Pod leg as shown.
4) Secure Locking Pins with connected hitch pins, and ensure Mounting Bracket is fully secured to Arc-O-Pod
leg.
6. Install 3-Way SRL on Mounting Bracket:
1) Remove (2) Plastic Screws from 3-Way SRL.
2) Latch 3-Way SRL Swivel Eye over hook on Mounting Bracket, then lower 3-Way SRL into Mounting Bracket
cradle.
3) Insert (2) screws provided with Mounting Bracket through Mounting Bracket and into 3-Way SRL at location
where Plastic Screws were removed. DO NOT use Plastic Screws to mount 3-Way SRL.
Locking Pins
inserted through
Mounting Bracket
and tripod leg,
and secured
with hitch pins.
3-Way SRL Swivel Eye
latched over hook on
Mounting Bracket
Plastic Screw location.
(2) Provided screws
inserted through
Mounting Bracket
and 3-Way SRL,
and secured with
hitch pin.