Product Manual

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
11 85083 (Rev. C)
Labels
ARCO POD
15030
Read and fully understand the
manufacturer’s supplied instructions before
using this product. It is the employers
responsibility to train each employee on the
usage of this product. Maximum user
weight may not exceed 310lbs.
Inspect the entirety of the tripod for
any signs of deformation or cracks. Do
not use if the product reveals an unsafe
condition.
Ensure all locking pins are in place
before using. Call Guardian Fall
Protection or your local distributor for
replacement parts.
The adjustable chain must be
connected to all three (3) feet before
use. Remove all slack from the chain
by adjusting it using the quick links in
line with the chain.
Adjust the tripod so that it sits level by
raising or lowering the feet as
necessary.
If connecting a 3-WAY SRL, be sure
that the mounting bracket is secure to
both the SRL and tripod before use.
Make sure the cable on the SRL is
routed through the top of the pulley
and locked in with the pulley pin above
the pulley.
If using a standard SRL, connect to one
of the 3 hard points at the head of the
tripod indicated by the label.
Make only compatible connections so
that roll out cannot occur.
1)
2)
3)
4)
5)
6)
Guardian Fall Protection
6305 S. 231st St.
Kent, WA 98032
800-466-6385
The Arco Pod is constructed from powder
coated steel and aluminum. DO NOT
EXPOSE ARCO POD TO
ELECTRICAL SOURCES. Avoid contact
with corrosive chemicals. Always store in a
dry location. Complies with ANSI Z359.1
and OSHA 1926.502 standards.
Manufactured 2009
CARABINER ATTACH-
MENT POINT. USE FOR
ATTACHMENT OF
CONNECTING
SUBSYSTEM THAT
LIMITS FALL ARREST
FORCES TO 1,800LBS
OR LESS. MAX.
WORKER WEIGHT MAY
NOT EXCEED 310LBS,
INCLUDING TOOLS.
INSTALL LOCKING PIN IN
ONE OF THE HOLES
BELOW WHEN PROPER
ADJUSTMENT IS
REACHED.
INSTALL THE TRIPOD
BRACKET TO THIS LEG
ONLY
LOCKING PIN